3 Axis Nema34 Stepper Motor 8.3N.m (1192 oz.in) & Driver & Power CNC for 3D printers & CNC. |
This item includes:
* 3 pcs Nema 34 stepper motor 34H2A4840 (8.3Nm, 1192 oz.in) in bipolar connection.
* 3 pcs Micro-Stepper motor driver 2L860, peak 7.8A, 24-80VDC
* 3 pcs Power supply 350W-48V DC ( Mean Well, the top brand )
* 1 pc Breakout board
Why this kit?
1) We choose quality steel for motor stator, quality SST for motor shaft, performance mangets for rotors, AWM UL3266 wires, Japan NSK bearings.
2) We choose the best quality power supply (Mean Well) for your CNC Router.
3) All drivers & PCBA bords have been done burn-in-test before shipment.
All factors make quality products.
|
1. STEPPER MOTOR 34H2A4840 |
SPECIFICATIONS:
Series
Model
|
Old P/N |
Motor
Length
(L,mm)
|
Rated
Current
(A)
|
Phase
Resistance
(ohm)
|
Phase
Inductance
(mH)
|
Holding
Torque
(Bipolar)
(N.m Min)
|
Holding
Torque
(Bipolar)
(oz.in Min)
|
Rotor
Inertia
(g.cm2)
|
Lead
Wire
(No.)
|
Motor
Weight
(kg)
|
34H2A4840 (Unipolar) |
34HS4801 |
114 |
4.0 |
1.1 |
5.5 |
5.9 |
843 |
1800 |
8 |
4.0 |
34H2A4840 (Bipolar) |
34HS4801 |
114 |
5.6 |
0.55 |
5.5 |
8.3 |
1192 |
1800 |
8->4 |
4.0 |
|
|
|
NSK quality ball bearings in side |
Come with UL3266 (125 ℃)quality wires |
New cable protector |
|
|
|
|
2. MICRO STEPPER MOTOR 2L860 |
Introduction:
2L860 is a type of two-phase hybrid stepping motor driver, The drive voltage of which is from 24VDC to 80VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 110mm frame size and less than 8.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when 2L860 run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on.
Features:
* High performance, low price
* Average current control, 2-phase sinusoidal output current drive
* Supply voltage from 24VDC to 80VDC
* Output current up to 7.8A
* Opto-isolated signal I/O
* Overvoltage, under voltage, overcorrect, phase short circuit protection
* 14 channels subdivision and automatic idle-current reduction
* 8 channels output phase current setting
* Offline command input terminal
* Motor torque is related with speed, but not related with step/revolution
* High start speed
* High hording torque under high speed
|
3. POWER SUPPLY - Top Brand << Mean Well >> |
Make sure your CNC system work well & reliable!
|
4. Breakout Board |
* Built in DB25 male connector.
* DB25 Output Pin:P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17.
* DB25 Input Pin: P10,P11,P12,P13,P15.
* DB25 GND Pin: P18-P25.
* Power supply: +5V DC.
* Built in C-class Optical-coupler.
* High quality with Surface-mount Tech. |
|
|
Our Stepper Motors are used on small to mid-sized CNC mills & milling machines, CNC lathes, Pick-n-place machines, Laser Engravers and Laser Cutters, Vinyl Sign Cutters, CNC Plasma Cutters, and CNC Foam Cutters. These motors have been used in precision telescope positioning systems and robots. |